| Número de pieza | 8D2 FOG |
| Marca | Innolux |
| Tamaño | 8.0 |
| Solicitud | IA |
| Resolución | 800×600 |
| Composición | CELL |
| Brillo | 0 |
| CR | 500:1 |
| Colores | 262K/16.7M |
| Iluminar desde el fondo | No B/L |
| Interfaz | TTL |
| marca de paneles | INNOLUX |
| modelo de panel | 8D2 FOG |
| tipo de panel | a-Si TFT-LCD , CELL |
| Tamaño del panel | 8.0 inch |
| resolución | 800(RGB)×600 , SVGA |
| modo de visualización | TN, Normally White, Transmissive |
| área activa | 162×121.5 mm |
| describir | 171×132.7×1.69 mm |
| superficie | Antiglare |
| profundidad de vidrio | 0.63+0.63 mm |
| relación de contraste | 500:1 (Typ.) |
| mostrar colores | 262K/16.7M (6-bit / 8-bit) |
| tiempo de respuesta | 10/15 (Typ.)(Tr/Td) |
| ángulo de visión | 70/70/50/70 (Typ.)(CR≥10)(L/R/U/D) |
| frecuencia | 60Hz |
| interfaz de señal | Parallel RGB (1 ch, 6/8-bit), 50 pins |
| voltaje de entrada | 3.3/10.4V (Typ.)(VCC/AVDD) |
| solicitud | IA |
| A080SN02 V0 | AUO | 8.0 | 800×600 |
| AT080TN43 | Innolux | 8.0 | 800×600 |
| AT080TN52 V.1 | Innolux | 8.0 | 800×600 |
| C080VW03 V0 | AUO | 8.0 | 800×480 |
| CLAA080JA11CW | CPT | 8.0 | 480×220 |
| CLAA080WQ05 | CPT | 8.0 | 800×1280 |
| EC080SC2 | E Ink | 8.0 | |
| LTA080B441A | TOSHIBA | 8.0 | 480×234 |
| N080ICE-GB1 | Innolux | 8.0 | 800×1280 |
| TX20D28VM2BAB | KOE | 8.0 | 800×480 |
| AA104VC10 | Mitsubishi | 10.4 | 640×480 |
| EL640.400-CB1 FRA | Lumineq | 9.1 | 640×400 |
| G150XTN02.0 | AUO | 15.0 | 1024×768 |
| G156XW01 V3 | AUO | 15.6 | 1366×768 |
| LB150X02-TL01 | LG Display | 15.0 | 1024×768 |
| LQ104V1DG59 | SHARP | 10.4 | 640×480 |
| MD480T640PG3 | Panasonic | 11.3 | 640×480 |
| NL8060BC21-02 | NLT | 8.4 | 800×600 |
| NL8060BC31-02 | NLT | 12.1 | 800×600 |
| TS104SAALC01-00 | Tianma | 10.4 | 800×600 |