| Número de pieza | PM102ZY1 |
| Marca | E Ink |
| Tamaño | 10.2 |
| Solicitud | DPF |
| Resolución | 1024×600 |
| Composición | CELL |
| Brillo | 0 |
| CR | 600:1 |
| Colores | 262K |
| Iluminar desde el fondo | No B/L |
| Interfaz | TTL/RSDS |
| marca de paneles | PVI |
| modelo de panel | PM102ZY1 |
| tipo de panel | a-Si TFT-LCD , CELL |
| Tamaño del panel | 10.2 inch |
| resolución | 1024(RGB)×600 , WSVGA |
| modo de visualización | TN, Normally White, Transmissive |
| área activa | 222.72×130.5 mm |
| describir | 230.62×164.2×1.63 mm |
| superficie | Antiglare |
| profundidad de vidrio | 0.60+0.60 mm |
| transmisividad | 7.0% (Typ.)(with Polarizer) |
| relación de contraste | 600:1 (Typ.) |
| mostrar colores | 262K (6-bit) |
| tiempo de respuesta | 15/25 (Typ.)(Tr/Td) |
| ángulo de visión | 60/60/35/50 (Typ.)(CR≥10)(L/R/U/D) |
| frecuencia | 60Hz |
| interfaz de señal | TTL/RSDS (1 ch, 6-bit), 60 pins |
| voltaje de entrada | 3.3/3.3/9.1/17.0/-5.6V (Typ.)(VCC/VDD1VDD2/VGG/VEE) |
| solicitud | DPF |
| AT102TN03 V.1 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.8 | Innolux | 10.2 | 800×480 |
| AT102TN42 | Innolux | 10.2 | 1024×600 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| CLAA102NA1BCN | CPT | 10.2 | 1024×600 |
| CLAA102NA2CCN | CPT | 10.2 | 1024×600 |
| PM100WX2 | E Ink | 10.0 | 800×480 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |
| A080SN01 V0 | AUO | 8.0 | 800×600 |
| A080SN01 V5 | AUO | 8.0 | 800×600 |
| A080SN03 V0 | AUO | 8.0 | 800×600 |
| CLAA070MA0ACW | CPT | 7.0 | 800×600 |
| EJ080NA-04B | Innolux | 8.0 | 1024×768 |
| EJ080NA-05B | Innolux | 8.0 | 800×600 |
| HSD070IDW1-A00 | HannStar | 7.0 | 800×480 |
| HSD070IDW1-A30 | HannStar | 7.0 | 800×480 |
| LW700AT9901 | Innolux | 7.0 | 800×480 |
| P64AN2AP08 | E Ink | 6.4 | 320×234 |